10 Best Screw Extractors 2021

While a bent or messed up nail can be removed with a little brute force, a bent or misplaced screw is a completely different story, often requiring extra tools to remove it successfully.

This is where screw extractors come in handy. These devices (or drill bits) are specifically designed to remove screws that aren’t where they should be.

While the explanation of a screw extractor is simple enough, finding the best screw extractor for your removal needs can be difficult due to the vast amount of different tools, kits, and buying options on the market.

Don’t sweat any more than you did while trying to remove that pesky screw, however – you’ve come to the right place if you’re looking for a device or drill bit to unlatch a screw!

Our guide below details everything you need to know about screw extractors.

Top 10 Screw Extractors

PictureNameTool or Bit Set?PriceRating (1-5)
Picture
Name
Tool or Bit Set?
Price
Rating (1-5)
1. Vampliers Screw Extractor Pliers Tool$$$4.7
2. Topec 35-Piece Screw Extractor and Drill Bit Set Set$$$$4.4
3. IRWIN HANSON Spiral Extractor and Drill Bit Set, 10 Piece, 11119 26.60 Set$$$$4.5
4. Alden 8440P Grabit Pro Broken Bolt and Damaged Screw ExtractorSet$$4.4
4. ROCKETSOCKET Extraction Socket SetSet$$$$4.8
6. Werkzeug Damaged Screw Extractor Set Set$$4.2
7. Moody Tools 58-0670 6-Piece Slot/Phil/Screw Extractor Combo Reversible Driver Set Set$$$4
8. Ontel Speedout Screw Remover Set$3.9
9. Engineer Pz-58 Screw Pliers Gt Set$$4.8
10. COMOWARE Screw Extractor & Left Hand Drill Bit SetSet$4.1

What You’ll Want to Know

We’re here to make your shopping easier, but it starts with learning the basics about screw extractors, so pay attention to what makes one tool/bit set stand out from the others!

  • Tool Versus Bit Set. This is one of the main, distinguishing factors when it comes to screw extractors, for they often come in the form of a tool, such as a set of pliers, or a bit set that can be easily installed on your drill.
    .
  • Screw Size. You’ll want to know what size screw you’re trying to remove and factor it into your buying decision, for there are plenty of differences in the sizes of bits that are included in different sets.

This also holds true for screw extraction tools as well; you’ll want to know the tool’s capacity to remove screws of varying sizes.

  • Material. The best screw extractor, whether it’s in the form of a drill bit or in the form of a plier, should be composed of carbon or stainless steel, the hardest and most durable of all metals made for tools.

Don’t compromise your and your tool’s safety because the tool or bit set you purchase is composed of a cheap alloy!

  • Warranty. The world of power tools isn’t straightforward – sometimes things break, and if they do, you’ll want to make sure that the tool you’re using is backed by a warranty that can bail you out.

Top 3 Best Screw Extractor Reviews

1. Vampliers Screw Extractor Pliers

Whether the screw you’re trying to remove has a worn thread, worn head, or even a head that’s been completely removed from the main screw, the Vampliers will get it out! Say goodbye to the stress associated with a badly or oddly placed screw; it’s time to get the job done.

This screw extraction tool is made of high carbon steel and bites down hard, due to the serrations present inside its jaws, which prevent slipping.

The handles of the Vampliers are comfortable, soft, and ergonomically designed for users to get the optimal twist and optimal grip.

Additionally, the Vamplier’s jaws are designed in a manner that allows them to fit into the tiniest of crevices, allowing for screw removal to occur virtually anywhere.

Vampliers is the best screw extractor for jobs that require more than just a bit you fit on the end of your drill. It is made of high carbon steel, has comfortable grips, and is designed to be used in practically any screw removal scenario.

Pros
  • Made of high carbon steel
  • Comfortable rubber handle
  • Good gripping teeth
Cons
  • The price is a bit expensive

2. Topec 35-Piece Screw Extractor and Drill Bit Set

If you have screws that are rusted, worn through, or have heads with no screw grip, this screw extractor set will help you get them out. It comes with 16 different drill bits as well; no job will be left undone with the Topec Screw Extractor and Drill Bit Set!

Composed of high carbon steel, this Topec set will last you a very long time and help you remove quite a large amount of screws.

With 35 different pieces, you’ll have decent flexibility as far as different sized screws are concerned; don’t put your eggs in one basket with a screw extractor that only includes one size!

It also comes with a case that may be just as durable as the extractors themselves, making storage easy and convenient.

This Topec extraction set deserves praise – it is made of high carbon steel, comes with various sized bits, and comes in a case that’s quite hardy.

Pros
  • Made of high carbon steel
  • Comes with various sized bits
  • A case is included
Cons
  • The price is a bit expensive

3. IRWIN HANSON Spiral Extractor and Drill Bit Set

This Irwin Hanson extractor set comes with not only extraction tools but classic drill bits as well, meaning that you will be able to get your screws out of jams as soon as they happen!

While it’s not made out of steel, it’s made out of cobalt, the next hardest material used for making tools.

Featuring ten different bit sizes, no stone will be left unturned, and no screw will be left untouched.

The set comes with a case, a precious commodity in the world of bit sets; say goodbye to flimsy plastic holders!

The Irwin Hanson Spiral Extractor and Drill Bit Set helps on both end of the drilling spectrum, with a kit that includes both extractors and classic drill bits. You’ll get your screws unjammed as soon as they become problematic; the whole world is at your fingertips!

Pros
  • Comes with various sized bits
  • Comes with a case
Cons
  • A little expensive

Frequently Asked Questions

Why do my Screw Heads Keep Stripping?

When turning a screw with a screwdriver or a power drill, make sure it’s not at an angle. If yo do use a power drill, make sure you are using the correct sized bit. Over-tightening a screw can also cause the head to be damaged.

How Much Weight Can A Screw Hold?

Generally, a screw can hold 80-100 pounds. Consider the following factors when deciding on a screw: type of thread, quality of screw, the way it is inserted, and the type of force that will act on it.

Leave a Reply

Your email address will not be published. Required fields are marked *